The effect of the grinding liquid in the drawing machine of the water mill

1、Reduce the temperature of the grinding area so that the workpiece is free from burns and deformations. Improve processing precision and surface quality.

2、It can improve the bad working condition, reduce the pressure on the sand belt, the pressure on the substrate and prevent the loading tendency, and reduce the friction and wear. As a result, the heating, plastic deformation and melting situation of the workpiece are reduced. Improve the durability of the sand belt. The coolant also has a positive effect on the surface roughness. Compared with the dry grinding pin, its value can be reduced by about 30%, which is because the coolant forms a film between the workpiece and the abrasive particles so that the abrasive particles do not squeeze the workpiece as deeply as the dry grinding pin, causing an excessive uplift.

3、At the same time, the cutting fluid added in the water mill can also prevent the sticky welding between the debris and the metal or the abrasive particles, and remove the debris in the clearance of the abrasive grain to achieve the non blocking cutting. Prevent the workpiece from scars. Compared with dry grinding, the grinding fluid in the water drawing wire drawing machine can quickly self sharpen with grinding fluid.

4、At the same time, the grinding fluid in the water drawing wire drawing machine can also remove rust and prevent the corrosion and oxidizing rust of the workpiece and machine tool.

In short, the grinding and polishing fluid in the water drawing machine is mainly composed of cooling and lubrication, and it plays a role of rust prevention and washing.